Saturday, 4 October 2014

Yoke Completed

After two days of reliving my childhood moments with LEGO, my yoke assembly is finally complete. The handle buttons are fully functional and the handle can rotate smoothly.

Completed yoke handle attached to base

The thumb button on the left side of the handle is for shooting whereas the centre button is to start a new game. Each button is connected to two wires. In order to keep my design elegant, I have redirected the wires though the inside of the yoke handle and out of the back. A rear view of the handle is below.

Rear view of yoke handle - wires are fed through the inside

To detect rotation of the handle, so the player can move left and right, I have used a very simple method by just sticking on foil on the underside of the handle.

Underside of yoke handle

The two foil pieces are connected to wires which run alongside the rest of the wires inside of the handle. To complete the circuit, a foil piece will need to make contact with the base. The base has two contacts which "detect rotation".

The base component

The two contacts you can see on the base are simply LEGO pieces attached to the base and are wrapped in foil which will be connected to ground. The yoke handle attaches onto the base on the rotational joint at the top. The base is actually very sturdy and can hold the weight of the yoke handle.

The development of the yoke wasn't too difficult, but it was quite time consuming. I am happy with the result and I look forward to testing it next week.

Friday, 3 October 2014

Interactive Prototype 2 - Yoke Development

It's been quiet on the blog for the past two weeks because I've been preoccupied with other coursework. Nonetheless, I have commenced development of my physical input, the 'yoke', for my game.

To recap, the yoke resembles the controls of an aeroplane, shape-wise but not entirely functionality-wise. It will feature two buttons: one to shoot and the other to start a new game. The rotation will simply move the player on the screen.

The entire yoke device will be comprised of two components: the handle and the base/stand. The handle will be attached to the base. The base is very important since it will detect the rotation. However, the detection won't actually be proper rotational detection. Instead, I intend to take a shortcut and just detect the contact of the underside of each end of the handle with the base.

My progress so far includes most of the yoke handle completed as well as the integration of the new game button which is situated in the centre.

Most of the yoke handle is completed including the centre-button to start a new game
Although it is made out of LEGO and may look flimsy in the photograph, it does in fact have very good structural integrity. The two wires you can see come from the centre button. They will be connected to ground and some key on the MakeyMakey.

The centre button is actually an old doorbell button. For shooting, I will use another push button I had found. The thickness of the black casing is just perfect to hold so I will have to somehow integrate this as a part of the yoke handle. Most likely, the whole unit will replace the left vertical block of the handle (see picture above).

These two buttons were found in the deepest reaches of my garage among the rest of the useful mess in there
I will try to keep my design elegant and not have a mess of wires everywhere. The two wires for the centre button will actually be run through the inside of the handle and out of the back. I will also do the same for the shooting button.

Wednesday, 17 September 2014

Week 8 - Progress (Minor Game Adjustments and Yoke Idea)

Just a small update

For Interactive Prototype 2, I have made a few minor adjustments to my game and have started looking into how I could build my physical yoke.

Some adjustments to the game include decreasing the frequency of letters spawning. A noticeable change is that now the letters have bubbles around them. This was a great suggestion from one of my testers. The coloured ellipse adds some extra surface area to the letters to make them easier to shoot since they have a visible hitbox now.

Letters are surrounded with an ellipse/bubble

For my yoke, I am thinking of building it out of LEGO. There'll be two components - the base and the actual handle. The handle will be attached to the base and will pivot left and right. The base will detect the handle rotations when the bottom of the handle makes contact with the base. The handle will have two buttons - one to shoot and one to start a new game.

Week 8 Exercise - Physical Interactions

For this week's exercise we were required to think of five physical inputs each for Email, Twitter and Super Mario Bros.

Email

  1. Different trash bins represent different folders/contacts. To send an email to a specific contact, toss some paper into the right bin.
  2. You hold an address book and slide contacts to your email on the screen to choose the recipients.
  3. Use a guitar for typing your email.
  4. Flush to clear your trash folder and junk mail - an external 'toilet flush handle' device connected via USB.
  5. To mark an email as read, stare the screen for a certain amount of time. To mark an email as unread, look away from the screen.

Twitter

  1. To hashtag something, perform the 'hashtag gesture' (Jimmy Fallon style) - this will require a wearable glove-like device
  2. To tag other people, whistle then touch them.
  3. To retweet something, open it then whistle twice.
  4. To follow people, drag them onto your queue - each person is represented by their avatar.
  5. To upload a picture, give it to the bird and pull the sling (similar to Super Angry Birds)

 Super Mario Bros

  1. Use a treadmill, or better, an elliptical trainer to walk forwards and backwards.
  2. Use a pressure plate to detect jumps.
  3. Ride a skateboard to control Mario, roll back and forth to run in either direction and perform an ollie to jump.
  4. Punch to shoot fireballs - use a speedbag or punching bag to detect the punch.
  5. Physically squat 100kg to crouch in the game.

Friday, 12 September 2014

Reflection for Interactive Prototype 1

I believe the testing session for my first interactive prototype was very successful.

My implementation so far served me well to test my intended ideas and interactions. This is mainly because the prototype was essentially a near-complete game with only minor elements missing. This had allowed me to test all of my game mechanics and rules very early. I now have a solid idea of what is good and what needs to be tweaked for the next iteration.

My goal for the first interactive prototype was to implement all core game mechanics which would form the foundation of my game. The aim of the testing session was to test this foundation before I had progressed any further into development. Elements such as player movement, alien movement, falling letters, shooting, and guessing the secret word were essential for testing as these form the basis of the game. These elements need to be perfected before moving onto things like physical inputs and other additional features/ideas.

Due to the nature of my game, there weren't any constraints which hindered me to test my ideas. Flash and ActionScript 3 is the perfect platform to work with for testing my core functionality.

Overall, I believe my first interactive prototype was effective for testing my concept. I had executed everything well to ensure I had received the feedback that I wanted.

Feedback from Interactive Prototype 1


Today we had conducted testing of our first interactive prototype. I believe today's testing went really well because I had received a lot of constructive and actionable feedback. I think this is a result of me asking very specific questions. The questions I asked are below:
  1. Is the objective of the game clear?
  2. Should the player movement be adjusted?
  3. Should the alien movement be adjusted?
  4. How easy is it to shoot the letters?
  5. Is it easy to infer what happens when a letter-bomb has landed on the ground?
  6. Is the placement of the answer field effective?
  7. Overall, is the game too hard or easy?

Summary of Feedback

Game's objective

For most people, the objective of the game was clear. The reason for this is that they were already familiar with games, particularly Space Invaders. They knew that they had to shoot the falling letters. However, some people struggled to figure out which letters to shoot or spare. But after multiple playthroughs, these users became familiar with the game rules. A few users suggested that a hint for the secret word should be displayed, because they were just shooting all of the letters because they were afraid to lose. I am not too sure yet how to address this because I believe it will make the game too easy.

Player movement

Interestingly, I had received mixed opinions regarding player movement. Half of the people loved the movement and thought it was perfect in terms of speed and smoothness. However, the other half did not like it at all because it wasn't accurate due to the deceleration. To address this, I will have to find a good balance of speed and deceleration. I am planning to reduce the amount of smoothing/deceleration and ensure that the player's speed is the same as the falling speed of the letters.

Alien movement

There were a few issues with the alien movement. The problem is that when multiple incorrect letters fall down at roughly the same time, the alien row will move down multiple times rapidly.This was  overwhelming for users to see. One of the users suggested that I should implement a delay timer to prevent the aliens from moving down rapidly in such a small amount of time.

Letters

Most users had no troubles shooting the actual letters themselves. They said that the letters were a big enough target and shouldn't be increased in size. One user suggested that the letters should be encapsulated in a circle. I think this is a good idea because it gives the letters, as targets, more surface area and a visible hit-box. This will aid in more accuracy for shooting the letters.

One major issue regarding the letters was that since they are randomly generated, sometimes the player has to wait for long periods of time for the correct letter to spawn. A great suggestion was that there should be some bias towards the correct letters for the generation and not to have it purely random. Another issue with the letters are that, sometimes, too many letters are spawned on the screen and it becomes very difficult to shoot them. This is due to the random timer interval which triggers a letter to spawn. Again, I will need to tweak this.

Overall difficulty

The overall difficulty of the game will need to be adjusted and balanced since I had received varying opinions regarding this.This was mainly due to the users' varying skill levels, but also because of some of the ways that the existing game mechanics that are implemented such as the player deceleration, alien movement and letter generation.

Over the next couple weeks I will tweak these mechanics and address the issues mentioned above.

Tuesday, 9 September 2014

Week 7 Exercise - Evaluating Previous Questions

For this week's exercise we were required to think about our questions from our Video Prototype (the questions can be found at http://tinyurl.com/alphabet-invaders).

I believe most of my questions were quantitative. I also used Semantic Differential scales for most of them, however one of them was a simple binary choice.

I think that my questions were very specific so the users could not give general answers. However, I did offer them the option to give general comments and suggestions at the end of the survey.

The question "Based on what you saw, does the interface look familar and easy to use?" is a compound question. I should have split this up into two questions:
  1. Does the interface look familiar?
  2. Does the interface look easy to use?
Also, instead of the binary choice, I could have used a scale like the other questions.